Access Ladder / Rockwall Assembly - KidKraft BOULDER STATION Installation And Operating Instructions Manual

Step 2: Access Ladder / Rockwall Assembly
Part 1
A: Place (2250) Left Rail on left hand side of 4 (2254) Ladder Treads and (2251) Right Rail on right hand side
with the grooves facing in. (fig. 2.1)
B: Fit each (2254) Ladder Tread into grooves on both (2250) and (2251) Rails, make sure the top edge of the
treads are flush to the front of the rails. (fig. 2.1 and 2.2)
C: Attach Rails and Ladder Treads together using 4 (S15) #8 x 1-3/4" Wood Screws per tread. (fig. 2.1)
Fig. 2.1
Right Side
2251
Left Side
2250
Fig. 2.2
End View
Wood Parts
1 x Left Rail 2 x 4 x 62-7/8"
2250
1 x Right Rail 2 x 4 x 62-7/8"
2251
4 x Ladder Tread 5/4 x 4 x 13-7/8"
2254
S15
S15
2254
Hardware
16 x #8 x 1-3/4" Wood Screw
S15
2 x 5/16 x 1-1/2" Hex Bolt
G1
(5/16" lock washer, 5/16" flat washer, 5/16" t-nut)
18
D: Attach Swing Brackets to the inside top of (2250)
and (2251) Rails at angled edge using 1 (G1) 5/16
x 1-1/2" Hex Bolt (with lock washer, flat washer and
t-nut) per bracket. Edge of Swing Bracket is flush with
edge of rails. (fig. 2.1 and 2.3)
2254
Fig. 2.3
Top of Ladder View
Swing
Bracket
G1
5/16" Lock
Washer
5/16" Flat
Washer
2250
Flush to
edges
5/16" T-Nut
Other Parts
2 x Swing Bracket