Firmware:) Select; Utility:) Aid (Application Identification String) Submenu - Comtech EF Data UT-4579 Installation And Operation Manual

UT-4579 X-Band Up Converters
Front Panel Operation
(FIRMWARE:) INFOIMAGE#1/#2APP
(FIRMWARE:) INFOIMAGE#1/#2FPGA

6.2.7.3.2 (FIRMWARE:) SELECT

Use this submenu to select the Current Active Firmware Image.
The read-only top line shows the Current Active Image. On the bottom line, use
the   keys to select #1 or #2 as the Next Reboot Image (i.e., the image that
will be active the next time the unit is rebooted). Press ENTER.
If the image that you select is already set as the designated Next Reboot Image,
this message displays:
You may repeat the task by instead selecting the alternate image.

6.2.7.4 (UTILITY:) AID (Application Identification String) Submenu

The Application Identification (AID) submenu allows you to create a customized
message. The AID may serve to identify the satellite, either transponder, beam,
App#X: FW-0000203x
X.X.X MM/DD/YY
FPGA#X: FW-0000204
X.X.X MM/DD/YY
Current Active Image: #1
Next Reboot Image: #1 #2
THAT IMAGE IS ALREADY
CURRENT. NO CHANGE MADE.
Edit AID Message?
No Yes
6–25
MN/UT4579.IOM
Revision 1