BOMBARDIER RALLY 200 2003 Shop Manual page 177

Disassembly of Drive Pulley
Sliding Half
Lift ramp plate no. 14 with sliding shoes no. 13.
Withdraw spacer no. 9.
1. Ramp plate
2. Sliding shoes
3. Spacer
1. Roller
2. Contact surface to sliding shoes
3. Ramp for the rollers
VMR2003_015_03_11A.FM
Cleaning of Drive Pulley
Clean pulley faces and shaft with fine steel wool
and dry cloth.
1. Faces of drive pulley
Reclean mounting surfaces with paper towel and
cleaning solvent. Use Bombardier pulley flange
cleaner (P/N 413 711 809).
Wipe off the mounting surfaces with a clean, dry
paper towel.
Only use petrol base cleaner when cleaning bush-
ings inside sliding half.
CAUTION: Do not use acetone to clean bushing.
Inspection of Drive Pulley
Drive Pulley
Drive pulley should be inspected annually.
Roller
Check roller kit no. 11 for roundness of external
diameter.
NOTE: Replace roller kit, when rollers are show-
ing flat surfaces.
1. Contact surface to drive pulley sliding half
A. Roller diameter
Section 03 ENGINE
Subsection 11 (CVT)
03-11-5