BOMBARDIER RALLY 200 2003 Shop Manual page 180

Section 03 ENGINE
Subsection 11 (CVT)
1. Lock washer
2. Driven pulley nut
– withdraw clutch drum no. 17
1. Clutch drum
2. CVT shaft
3. Clutch
– belt no. 5.
03-11-8
1. Driven pulley outer half against clutch assembly
2. Crankshaft locking bolt
Disassembly of Driven Pulley
NOTE: The following procedure is not necessary
except if clutch no. 18 must be removed. Refer to
Inspection before proceed.
Remove:
– nut no. 19 as per following procedure.
Fix clutch support (P/N 529 035 863) in a vise and
place driven pulley assembly.
1. Clutch holding tool
2. Vise
3. Driven pulley assembly
4. Nut wrench size 46
VMR2003_015_03_11A.FM