BOMBARDIER RALLY 200 2003 Shop Manual page 87

Remove:
– chain roller
– drive chain from engine sprocket
– swing arm bolt
1. Chain roller
2. Drive chain
3. Engine sprocket
4. Swing arm bolt
NOTE: Move the swing arm back. Take care do
not lose the O-rings (4).
– front engine mounting bolt no. 5.
1. Front engine mounting bolt
VMR2003_008_03_04A.FM
Subsection 04 (REMOVAL AND INSTALLATION)
Lift engine no. 6 approximately 25 mm (1 in) to
clear front mounting brackets.
Turn engine 90°, cylinder head towards right side
of vehicle.
Rest engine onto frame and relocate engine lifting
strap.
Relift engine and move away from vehicle.
Installation
Lift engine and move towards vehicle.
Rest engine onto frame and relocate lifting strap
to opposite side of frame.
Start lifting engine up, turn engine 90°, cylinder
head towards front of vehicle, until complete en-
gine has entered frame area.
Lower engine into its place.
Install the front engine mounting bolt no. 5. Do not
torque yet.
Section 03 ENGINE
03-04-7