– shift shaft plate no. 21.
1. Shift shaft plate
2. Reverse switch
3. Neutral switch
Inspection
Check shift fork for visible damage, wear or bent
shift fork claws.
Measure the shift fork claw thickness.
SHIFT FORK CLAW THICKNESS
NEW MINIMUM
NEW MAXIMUM
SERVICE LIMIT
VMR2003_014_03_10A.FM
4.800 mm (.189 in)
4.900 mm (.193 in)
4.750 mm (.187 in)
Subsection 10 (GEARBOX)
1. Micrometer
A. Shift fork claw thickness
Check shift shaft plate track for scouring or heavy
wear like rounded engagement slots.
1. Shift shaft plate
2. Shift fork position for high gear
3. Shift fork position for neutral gear
4. Shift fork position for reverse gear
Section 03 ENGINE
03-10-11