BOMBARDIER RALLY 200 2003 Shop Manual page 167

Section 03 ENGINE
Subsection 10 (GEARBOX)
NOTE: Following illustration shows gear no. 24
and the respective shifting position.
1. High gear position
2. Neutral position
3. Reverse gear (chain drive)
– main shaft no. 25 with a soft hammer
1. Main shaft
2. Soft hammer
03-10-10
NOTE: Following illustration shows engagement
grooves for spring plate no. 26 and the respective
shifting position.
1. High gear position
2. Neutral position
3. Reverse position
NOTE: In neutral position the spring plate engages
deeper in the shift shaft groove. The spring plate
arm pushes against the intermediate shaft gear
and retards its motion in idle.
1. Shift shaft plate
2. Spring plate
3. Spring plate arm
4. Contact area to spring plate arm in neutral position
VMR2003_014_03_10A.FM