Remove the block heater outlet hose no. 33.
1. Block heater outlet hose
2. Fuel line
NOTE: Catch any coolant spillage.
Unscrew the clamps retaining the carburetor to
the engine and to the air box. Free carburetor from
the intake adaptor.
1. Unscrew these clamps
VMR2003_009_03_05A.FM
Subsection 05 (COOLING SYSTEM)
Unscrew the valve piston assembly then remove
the block heater inlet hose no. 32.
1. Valve piston assembly
2. Block heater inlet hose
Use the following procedure if the block heater
and carburetor separation is necessary (ex: block
heater or carburetor replacement).
With the carburetor removed, unscrew the screw
no. 35 then remove the block heater lock no. 36.
Section 03 ENGINE
03-05-13