BOMBARDIER RALLY 200 2003 Shop Manual page 71

SYMPTOM BELT SIDES WORN CONCAVE.
CONDITION NORMAL USE.
Test/Inspection
A00D0DY
SYMPTOM BELT DISINTEGRATION.
CONDITION NORMAL USE.
Test/Inspection
A00DOEY
SYMPTOM FLEX CRACKS BETWEEN COGS.
CONDITION NORMAL USE.
Test/Inspection
A00D0GY
VMR2003_006_03_02A.FM
1. Check pulley half surfaces.
a. Rough or scratched pulley half surfaces.
Repair or replace.
2. Check drive belt identification number.
a. Unspecified type of belt.
Replace belt with an appropriate drive belt (refer to TECHNICAL DATA).
1. Check drive belt identification number.
a. Excessive belt speed.
Using unspecified type of belt. Replace belt with proper type of belt (refer to
TECHNICAL DATA).
2. Check if pulley halves are clean.
a. Oil on pulley surfaces.
Clean pulley surfaces with fine emery cloth and wipe clean using Pulley Flange
Cleaner (P/N 413 711 809) and a cloth.
1. Check drive belt condition.
a. Considerable use, belt wearing out.
Replace.
Section 03 ENGINE
Subsection 02 (TROUBLESHOOTING)
03-02-11