Electronic Key Reader 1067/334-1067/335 And Proximity Reader 1067/434 - 1067/435; 1058/035 Remote Control - urmet domus 1067/032 Programming Manual

M Red LED
tamper memory
N Green LED
System status
O Arrow keys
P MENU key
Q ESC key
R OK key
S Cover
2.2 ELECTRONIC KEY READER 1067/334–1067/335 AND PROXIMITY READER 1067/434 – 1067/435
Description
1 (Green) LED for status of
2 3 associated zones
A Yellow LED
summarising alarms and
signalling
B Keyhole or
Transponder
2.3

1058/035 REMOTE CONTROL

NOTE: device utilizable with 1067 control panel and 1067/021 keypad software version 3.00 or higher and with an
1067/010 radio expansion.
DS1067-035A
Off = no tamper
On = tamper memory
See § 2.4.4
On = system totally armed
Off = system totally disarmed
Blinking = system partially armed
See § 2.4.1
Scroll the menu items; change the value of some parameters.
Access to the menu.
Back to the upper level menu
Confirms the access code or any other entered data; confirms the selected
menu item and goes to its submenu.
It protects numerical keys.
Off = all zones associated to the LED are not active
On = all zones associated to the LED are active
Blinking = at least one zone associated to the LED is active
Off = no signalling for zones associated to electronic key reader
On= alarm signalling stored for zones associated to electronic key reader
or tampering signalling or system failure signalling (the LED goes off at
next system arm, if the alarm has gone off in the meantime or until the
failure is repaired).
Blinking = at least one open input is present among zones associated
electronic key reader.
If alarms or failures and open inputs are present at the same time, the
LED is on steady.
In general putting on this LED is for suggesting to control signalling details
on system keypad.
1067/334 – 1067/35 hole to insert electronic key.
1067/434 – 1067/435 detector for transponder key.
Ref. Description
Bi-colour LED
A
Red / Green
Key 1
Arm
Key 2
Programmable
depending on the
control unit
Key 3
Arm/disarm
Toggle
Key 4
Disarm
9
Use or provided indications
Use or provided indications
ON Red= this LED goes on blinking when
pressing any key, followed by a beep if the
control unit has received the command.
ON Green= pressing any key, this LED
indicates the low battery status.
This key arms the zones associated.
This key is set univocally either to OUTPUT
device arm/disarm function or to generate 4
different alarm types: Silent Panic, Audible
panic, Emergency, Fire alarm.
This key Arms/ Disarms with toggle function
the zones associated
This key disarms the zones associated
LBT8633