4.2
ALPHANUMERIC CHARACTERS INPUT
With the keypad it is possible to enter alphanumeric characters to store names describing users, zones, outputs, etc.
Each name can be made up of 24 characters as a maximum. Keys allow to scroll and select several characters, as
shown in the following table. The position of the new entered character is indicated by a cursor blinking on the display.
To write a name:
•
press repeatedly the key associated to the desired character until it appears:
•
use ► and ◄ keys to go to the next or previous position (to delete unwanted characters press 0 character [blank]);
•
at the end press OK key to store the name or ESC key to exit from the procedure without saving it.
Key
Character
1
. , : ; ! ? 1
2
A B C a b c 2
3
D E F d e f 3
4
G H I g h i 4
5
J K L j k l 5
4.3
LANGUAGE SELECTION
Before starting, select the language used to display menu items on the keypad. Default language is Italian, but it is
possible to choose between different languages. To access the language setting function follow the instructions below:
1. Enter on keypad the Installer code (default 000000) and press OK key.
2. Press MENU key.
3. Press ▼ key until "MAINTENANCE" appears on the display.
4. Press OK key to confirm.
5. Press OK key. The first system keypad is shown.
6. Select the keypad where to change the language by pressing ▼ key and confirm the
selection with OK key.
7. Press ▼ key until the desired language appears on display and confirm selection with OK
key.
8. On both keypads appears "Download in progress".
9. At the end of operation: "END CHANGE LANG.", press OK and after press ESC key
repeatedly to exit from the menu.
4.4
TIME/DATE SETTING – SUMMER TIME
Date and time can be shown on keypad in display in rest conditions (see § 5.10.1 Info display) and are used in recording
events into the log and for Timing Programmer functions.
To modify date and time displayed on the display, access, from either Master menu or Technician, menu at item
« SETTING » / « TIME-DATE »
•
« SET HOUR »
•
« SET DATE »
•
« SUMMER TIME »
•
« SOLAR MONTH »
•
« SUMMER MONTH »
•
« SUNDAY »
DS1067-035A
directly enter time in 24-hour format by numerical keys
directly enter day / month / year by numerical keys
set "ENABLE" if you wish solar / summer time to be updated automatically,
otherwise, set "DISABLE"
by keys ▼ and ▲, set the month when solar time comes into force
by keys ▼ and ▲, set the month when summer time comes into force
by keys ▼ and ▲, set the Sunday when change of time occurs, precisely, either
"LAST SUNDAY" or "FIRST SUNDAY"
21
Key
Character
6
M N O m n o 6
7
P Q R S p q r s 7
8
T U V t u v 8
9
W X Y Z w x y z 9
0
[blank] 0 + -
UT00: INSTALLER
MAINTENANCE
MAINTENANCE
LINGUA-LANGUAGE
LINGUA-LANGUAGE
KP01:KP 01
KP01:KP 01
ITALIANO
DOWNLOAD
IN PROGRESS 15%
LBT8633