4.10.4
Radio input attributes: Bypass allowed, Release type, Common input, AND inputs
The table below lists the available programming, according to the type of input:
Device
Programming
Bypass not allowed
Bypass allowed
Bypass allowed (default)
Release type
Common input
AND Inputs
Assign another input
For complete description relevant to the multiple attributes applicable to radio inputs, refer to the description provided at
the paragraph dealing with wired devices since it is the same one: § 4.6.4 Bypass allowed and; § 4.6.6 Burglar inputs
attributes.
4.10.5
Radio ancillary functions (Gong, Courtesy light, Door opener, Absence of move)
The table below lists the available programming, according to the type of input:
Device
Programming
Ancillary
functions
For complete description relevant to the ancillary functions applicable to radio inputs, refer to the description provided
at the paragraph dealing with wired devices since it is the same one: § 4.6.5 – Ancillary functions.
4.10.6
Assigning a radio input to a videocamera
The table below lists the available programming, according to the type of input:
Device
Programming
Do not assign (default)
Video assign
For complete description relevant to the assignment of a videocamera applicable to radio inputs, refer to the description
provided at the paragraph dealing with wired devices since it is the same one: § 4.6.7 – Input associated to a video
camera.
4.10.7
Radio input programming
To program an radio input follow the instructions below:
1.
Enter on the keypad the Installer code (default 000000) and press OK key.
2.
Press MENU key.
3.
Press ▼ key until "PROGRAMMING" appears on the display.
4.
Press OK key to confirm.
5.
Press ▼ key until "RADIO DEVICES" appears.
6.
Press OK key to confirm. "EW01:EW01" appears.
7.
Press OK key to confirm. Press ▼ key to select the desired type of device (IR; DC)
DS1067-035A
1058/101
Value
Bypass allowed (default)
Single
Double
AND zones
OR zones
(default)
Do not assign
another input
Assign another input
1058/101
Value
None (default)
Door opener
Courtesy light
Absence of move
Absence of move
Gong
1058/101
Value
Do not assign (default)
Video No.
1058/201
Reed contact
Bypass not allowed
Single
Double
AND zones
OR zones
(default)
Do not assign
another input
1058/201
Reed contact
None (default)
None (default)
Door opener
Courtesy light
Courtesy light
Absence of move
Gong
1058/201
Reed contact
Do not assign (default)
Video No.
34
Aux contact
Bypass not allowed
Bypass allowed (default)
Single
Double
AND zones
OR zones
(default)
Do not assign
another input
Assign another input
Aux contact
Door opener
Only one of these
functions can be
Gong
Aux contact
Video No.
Notes
Each of these
attributes can be
programmed
individually
The other
assigned input
must feature
the same
customization
Notes
assigned.
Notes
Can only be
used if video
gateway
is provided
UT00: INSTALLER
PROGRAMMING
PROGRAMMING
RADIO DEVICES
RADIO DEVICES
EW01:EW01
EW01:EW01
SELECT DC
LBT8633