Key Deleting; Key Configuration - urmet domus 1067/032 Programming Manual

4.17.2

Key deleting

To delete an electronic or proximity key from the system follow the instructions below:
1. Enter on the keypad the Master code or the Installer code and press OK key.
2. Press MENU key.
3. Press ▼ key until "SETTINGS" appears on the display.
4. Press OK key to confirm.
5. Press ▼ key until "KEYS" appears.
6. Press OK key to confirm.
7. Press ▼ key until "DELETE KEY" appears. Press OK key to confirm.
8. Select with ▼ key the key to be deleted and press OK key to confirm.
9. Press OK key to delete or ESC key to undo.
10. Delete the next key, by following the same procedure from step 8 or press ESC key
repeatedly to exit from the menu.
4.17.3

Key configuration

For each key can be defined the following parameters:
•
Key type, that is what the key controls. Available options are:
- Accesses: Every insertion toggles the door opener output and the event is stored in the event log.
- Zones: the key is enabled for normal functions of burglar system control (arming/disarming).
- Zones+ Accesses: the key is enabled for both functions.
•
Zones, that is the zones associated to the key.
•
Name, that is a clear-text name to identify easier the key in the event log and in messages.
To configure an electronic or proximity key follow the instructions below:
1. Enter on the keypad the Installer or Master code and press OK key.
2. Press MENU key.
3. Press ▼ key until "SETTINGS" appears on the display.
4. Press OK key to confirm.
5. Press ▼ key until "KEYS" appears.
6. Press OK key to confirm.
7. Press ▼ key until "CONFIG. KEY" appears. Press OK key to confirm.
8. Select with ▼ key the key to be configured and press OK key to confirm.
9. Press OK key to confirm.
10. Press OK key to confirm. Select with ▼ key the type to be used (ZONE CONTROL,
ACCESS CONTROL or ZONE/ACCESS CONTROL) and press OK key to confirm.
11. Press ▼ key until "ASSIGN" appears and press OK key to confirm.
12. Choose if the key must be associated to all the system ("SYSTEM") or only to specific
zones ("ZONES"). Press OK key to confirm
DS1067-035A
59
UT00:INSTALLER 1
SETTINGS
SETTINGS
KEYS
KEYS
ACQUIRE KEY
KEYS
DELETE KEY
DELETE KEY
KE01:...
KE01:...
ARE YOU SURE?
UT00:INSTALLER 1
SETTINGS
SETTINGS
KEYS
KEYS
ACQUIRE KEY
KEYS
CONFIG. KEY
CONFIG. KEY
KE01:...
KE01:...
KEY FUNCTION
KEY FUNCTION
CTRL ZONE
KE01:...
ASSIGN
ASSIGN
SYSTEM
LBT8633