Table of Contents
Advertisement
4.16.7
User a clear-text name
To give a user a clear-text name makes his identification easier during enabling, configuration and Event log reading
operations.
To give a user a clear-text name follow the instructions below:
1. Enter on the keypad the Master code or Installer code or User code and press OK key.
2. Press MENU key.
3. Press ▼ key until "SETTINGS" appears on the display. Press OK key to confirm.
4. Press ▼ key until "USERS" appears and confirm with OK key.
5. "CONFIGURE USER" appears. Press again OK.
6. Select with ▲ and ▼ keys the user to be configured and confirm the selection with OK key.
7. Confirm the selection with OK key.
8. Press ▼ key until "NAME" appears and confirm with OK key.
9. Enter with the keypad the new name, up to 10 characters, and confirm with OK key.
(for further information see paragraph 4.2 Alphanumeric characters input).
10. Press ESC key repeatedly to exit from the menu.
4.17 KEYS
4.17.1
Key acquisition
The system can manage up to 32 electronic and proximity keys.
For electronic or proximity key acquisition by the system follow the instructions below:
1. Enter on the keypad the Master code (default 111111) or the Installer code (default
000000) and press OK key.
2. Press MENU key.
3. Press ▼ key until "SETTINGS" appears on the display.
4. Press OK key to confirm.
5. Press ▼ key until "KEYS" appears.
6. Press OK key to confirm.
7. Press again OK key. The readers list appears. Select with ▼ and ▲ keys the reader that
will acquire the key and confirm with OK key.
8. The 4 front LEDs of the reader start blinking to indicate that it is ready to receive a key to
be stored.
9. Insert the electronic key or bring near the transponder key. The reader LEDs stop blinking
and turn on green steady. On the keypad display appears the address assigned to the key.
Remove the acquired key.
10. To acquire other keys, insert or bring them near, according to the type, and wait until on the
keypad display appears a new address. After acquisition of all the keys, press ESC key
repeatedly to exit from the menu.
DS1067-035A
58
UT01:MASTER
SETTINGS
SETTINGS
USERS
USERS
CONFIGURE USER
CONFIGURE USER
UT02:...
UT02:...
ZONES ASSIGN
NAME
UT02:...
UT02:Andrea
NAME
UT01:MASTER
SETTINGS
SETTINGS
KEYS
KEYS
ACQUIRE KEY
ACQUIRE KEY
DK01:DK01
ACQUIRE KEY
IN PROGRESS...
ACQUIRE KEY
KE01:...
LBT8633
Advertisement
Table of Contents
