Table of Contents
Advertisement
4.16.4
How to associate users to zones
To associate a user to some zones follow the instructions below:
1. Enter on the keypad the Master code (default 111111) and press OK key.
2. Press MENU key.
3. Press ▼ key until "SETTINGS" appears on the display. Press OK key to confirm.
4. Press ▼ key until "USERS" appears on the display. Press OK key to confirm.
5. "CONFIGURE USER" appears. Press again OK.
6. Select with ▲ and ▼ keys the user to be configured and confirm the selection with OK
key.
7. Confirm the selection with OK key.
8. Press ▼ key until "ZONES" appears and confirm with OK key.
9. Press OK key to confirm. Select desired zones and press OK key to confirm.
10. Press ESC key repeatedly to exit from the menu.
4.16.5
Change code
Every user can freely change his access code. To change the code follow the instructions below:
1. Enter on the keypad the code of the user (included Master and Installer) that wants to change
the code and press OK key.
2. Press MENU key.
3. Press ▼ key until "SETTINGS" appears on the display. Press OK key to confirm.
4. Press ▼ key until "CHANGE CODE" appears and confirm with OK key.
5. "NEW" appears. Enter a new code (from 4 to 6 digits) and press OK key to confirm.
6. Enter again the new code to confirm.
7. Press ESC key repeatedly to exit from the menu.
4.16.6
User code reset
When a user has forgotten his code, it is possible to reset the code to default.
To reset a code to default follow the instructions below:
1. Enter on the keypad the Master code (default 111111) and press OK key.
2. Press MENU key.
3. Press ▼ key until "SETTINGS" appears on the display. Press OK key to confirm.
4. Press ▼ key until "USERS" appears and confirm with OK key.
5. Press ▼ key until "DEFAULT CODE" appears and confirm with OK key.
6. Select with ▲ and ▼ keys the user to be configured and confirm the selection with OK key.
7. Confirm the selection with OK key.
8. The code of the selected user is reset to default value. Press ESC key repeatedly to exit
from the menu.
DS1067-035A
57
UT01:MASTER
SETTINGS
SETTINGS
USERS
USERS
CONFIGURE USER
CONFIGURE USER
UT02:...
UT02:...
ASSIGN
ASSIGN
ZONES
ZN01:...
□□□□□□
UT02:...
SETTINGS
SETTINGS
CHANGE CODE
CHANGE CODE
NEW: ------
CHANGE CODE
CONFIRM
UT01:MASTER
SETTINGS
SETTINGS
USERS
USERS
CONFIGURE USER
DEFAULT CODE
UT02:...
UT02:...
ARE YOU SURE?
USERS
DEFAULT CODE
LBT8633
Advertisement
Table of Contents
