Installer Menu; Event Log Submenu - urmet domus 1067/032 Programming Manual

Bus control panel 8/32 inputs
Table of Contents

Advertisement

6.2

INSTALLER MENU

Start selections in Installer menu are:
SYSTEM STATUS
It allows to verify the status of the zones and modify them.
EVENT LOG
It allows to read and delete the list of events stored in the control panel.
(see § 6.2.1 Eventt log submenu ).
SETTINGS
It allows to exclude inputs, set time and date, change installer code, configure users or reset their codes to
default values, acquire configure or delete electonic keys and transponders; to configure timing programmer
(see § 6.2.2 Setting submenu).
TEST
It allows to carry out specific tests to check the system correct working.
There can be separately checked the inputs and outputs of control panel and of the other devices connected
to the bus, the battery and vocal telephone calls as well as the calls to remote supervision centres and GSM
signal (see § 6.2.3 Test submenu ).
PROGRAMMING
It allows to set the number of system zones and configure them, to configure the inputs of control panel and
of the other bus peripheral units, to configure the outputs of control panel and expansions, to configure
keypads and readers and program system code for remote management (see § 5.2.4 System programming
submenu) .
PARAMETERS
It allows to set system general timing.
(see § 6.2.5 Parameters Submenu ).
TELEPHONE DIALER
It allows to program or modify telephone numbers for sending alarms and warnings, associate specific alarms
to every telephone number and specify sending modes, set parameters for PSTN and GSM networks, edit
SMS messages, enable and configure other telephone functions (see § 6.2.6 Telephone dialer Submenu ).
MAINTENANCE
It allows to perform maintenance operations on the system, as well as change of language, acquiring new
devices, removing devices, resetting and saving programming operations carried out (see § 6.2.7
Maintenance Submenu ).
With system active, only item System status can be accessed (see § 2.4.1).
6.2.1

Event log submenu

LEVEL 2
READ EVENT LOG
ERASE EVENT LOG
DS1067-035A
LEVEL 3
85
LEVEL 4
LEVEL 5
LBT8633

Advertisement

Table of Contents
loading

This manual is also suitable for:

1067/042

Table of Contents