Table of Contents
Advertisement
Both.the.control.panels.have.the.following.characteristics.and.features:
•
0.÷.40V~,.50/60Hz.power.supply,.with.1V.backup.battery.
•
Inputs configurable as NC, balanced or fast (to connect directly the rolling shutter contact)
•
Up to 8 command devices, that can be freely chosen between electronic key or transponder key readers (4 max) and keypads (4 max).
•
1 24H input (always active).
•
Up.to.10.keys.
•
Up to 10 codes, freely programmable (from 4 to 6 digits).
•
Free.association.of.inputs.to.zones..
•
Anti-theft function (with keypad only).
•
Technological input for technological detectors (smoke, fire, flood, etc.).
•
"Technological" alarm management (dedicated output in case of "technological alarm").
•
"Rescue".alarm.management.
•
Freely.selectable.entry.and.exit.times.
•
1.delayed.input..
•
LED.on.the.control.panel.front.side.to.display.state/occurred.events.
•
Capability.to.exclude.each.input.by.dedicated.buttons.on.the.control.panel.front..
•
Input.automatic.exclusion.after.8.consecutive.alarms.
•
Automatic exclusion of the open input at the activation time (function selectable by jumper).
•
Alarm events log (browsable with PC).
•
RS232-USB interface (optional).
•
Local.or.remote.control.panel.programming.by.PC.with.application.software.
•
PSTN telephone communicator (optional).
•
GSM module (optional).
•
Priority.selection.between.PSTn/GSM,.if.in.the.control.panel.are.installed.both.the.modules..
•
Remote management (system state inquiry, with DTMF commands or PC and system activation with DTMF commands).
•
Remote assistance (system parameters configuration and change).
•
Remote surveillance (alarm and signalling sending with numeric protocols: IDP – ADF – SIA).
1.3.2 MANAGEMENT KEYPAD WITH LED – 1061/025
The.management.keypad.with.LEDs.allows.to.arm.and.disarm.the.system,.also.partially,.by.signalling.the.partitions.state.on.dedicated.LEDs,.
with alarms storage and failures signalling. The keypad manages up to 10 codes (from 4 to 6 digits) and is equipped with an internal buzzer,
auxiliary input and tamper input. By entering on the keypad a special code (programmable), can be activated the anti-theft function. The keypad
is connected to the control panel with the 4-wire bus and can be wall mounted, with the provided box, or flush mounted on 3-modules box, using
in.both.the.cases.the.Simon.Urmet.nea.residential.series.frame.and.plate,.provided.with.product.
1.3.3 ELECTRONIC KEY READER – 1061/334 AND 1061/335.
The reader allows to arm and disarm the system, also partially, with an electronic key; it is connected to the control panel with the 4-wire bus. A
Simon.Urmet.series.nea.adapter.is.provided.with.the.key..
1.3.4 PROXIMITY READER – 1061/434 AND 1061/435
The proximity reader allows to arm and disarm the system, also partially, with a transponder key; it is connected to the control panel with the
4-wire.bus..A.Simon.Urmet.series.nea.adapter.is.provided.with.the.reader.
4
1
2
4
3
5
7
A
6
8
X
B
9
0
C
O K
D
D
A
B C
DS1061-015B
Hide quick links:
Advertisement
Table of Contents
