Table of Contents
Advertisement
To configure PSTN parameters follow the instructions below:
1. Enter on the keypad the Installer code (default 000000) and press OK key.
2. Press MENU key.
3. Press ▼ key until "TELEPHONE DIALER" appears on the display.
4. Press OK key to confirm.
5. Press ▼ key until "PSTN PARAMETERS" appears
6. Press OK key to confirm.
7. Press OK key. Select with ▼ and ▲ keys the country where the 1067 system is installed
and press OK key to confirm.
8. Press ▼ key until "PABX CONNECTION" appears.
9. Press OK key. Select with ▼ and ▲ keys between DISABLE (the communicator is directly
connected to the PSTN line) or NUMBER: 0, NUMBER: 1 etc. (number to get the external
line through the PABX) and confirm the selection with OK key.
10. Press ▼ key until "TONE LINE CHECK" appears.
11. Press OK key. Select with ▼ and ▲ keys if the tones line check is enabled or disabled
and confirm the selection with OK key.
12. Press ▼ key until "ANSWER CONTROL." appears.
13. Press OK key. Select with ▼ and ▲ keys if the communicator must enable or disable the
answer check and confirm the selection with OK key.
14. Press ESC key repeatedly to exit from the menu.
4.14.14 GSM parameters
If GSM module interface has been installed, it is possible to configure the following parameters:
•
SIM PIN: it allows to store the PIN code for the SIM (if it is requested); the code can contain from 4 to 6 digits.
The PIN code is provided by GSM telephone network provider.
•
SIM CARD expiry: it allows to store month and year of prepaid SIM expiration. The first day of the stored month, at
10 o'clock, 1067/032 or 1067/042 control panel will send a warning message to vocal numbers and SMS configured
for that event. It is suggested to store the month before the real expiry date (for example, if the SIM expires in April,
store March). After reloading SIM Card credit, reset this date in order to be warned again on expiration.
•
Incoming SMS: it allows to enable SMS receiving for management of commandable outputs and video e-mail
sending requests.
DS1067-035A
48
UT00: INSTALLER
TELEPHONE DIALER
TELEPHONE DIALER
PHONE NUMBERS
TELEPHONE DIALER
PSTN PARAMETERS
PSTN PARAMETERS
NATION
NATION
ITALY
PSTN PARAMETERS
PABX CONNECTION
PABX CONNECTION
DISABLE
PSTN PARAMETERS
TONE LINE CHECK
TONE LINE CHECK
DISABLE
PSTN PARAMETERS
ANSWER CONTROL
ANSWER CONTROL
DISABLE
LBT8633
Advertisement
Table of Contents
