Main.programming.menu; Inputs.programming.menu - urmet domus 1061/004 Installation And Programming Manual

5.4.2 MAIN PROGRAMMING MENU
OK
Inputs programming menu
OK
Outputs programming menu
OK
Partitions programming menu
OK
Times programming menu
OK
OK
Codes/partitions assignment menu
OK
Keys/partitions assignment menu
OK
Codes programming menu
OK
PSTN/GSM communicator
OK
Vocal messages recording menu
5.4.3 INPUTS PROGRAMMING MENU
OK
Main programming menu
ESC
Inputs 5 and 6 are present on
1061/006 control panel only.
With this menu it is possible to configure every input. Available configurations are the following:
• Intrusion: it sends an intrusion alarm if the circuit is opened (input configured as NC) or unbalanced (input configured as balanced) and the
concerned.partition.is.active..The.circuit.opening.can.be.caused.by.a.tamper.attempt.or.by.an.alarmed.detector..In.case.of.balanced.line,.
DS1061-015B
Keys programming menu
programming menu
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
OK
OK
Intrusion
ESC
OK
Not used
OK
OK
Intrusion
ESC
Rolling
shutter
OK
Technological
OK
Rescue
OK
Not used
OK
OK
High
ESC
OK
Low
When pressing the OK button
to confirm the configuration,
the LCD display blinks and
appears the dot down on the
right corner.
1