Maximum Load Display; Current Supply Quantity Within The Current Gas Day - RMG EC 900 Operating Instructions Manual

..........................................................................................................................................................................................................

Maximum load display

Current supply quantity within the current gas day

quantities for the volumes at base and measurement conditions. Further below, the current quanti-
ties for the volumes at base and measurement conditions appear. At the end of the supply period,
the remaining time is reset and the current volume meters restart at zero. If the previous maximum
quantity is exceeded, this will be transferred at once to the maximum value display.
These displays allow the current consumption to be determined.
The structure and mode of operation are identical for the displays showing the supply period per
month and the gas day per month. The remaining time for the gas day per month will always be
indicated in minutes.
..........................................................................................................................................................................................................
If you select "Current load" in the customized display
and press Enter, you will reach another selection screen.
Here you can select to display the current supply quanti-
ty of the current supply period within the current gas
day, the current supply quantity of the current supply
period within the current month and the current supply
quantity of the current gas day within the current month.
This picture shows under "Maximum:" the time indicated
in "Hour:Minute" and "Day.Month" when the last maxi-
mum value of the gas day occurred (this always refers to
the time of the maximum value for the volume at base
conditions).
The line below shows the time (in the case of periods
exceeding 3 minutes in minutes; in the case of periods of
less than 3 minutes in seconds) until the next end of pe-
riod. The next two lines show the last maximum supply
OPERATION
57