Displaying And Changing Parameters For Calculating The K Coefficient - RMG EC 900 Operating Instructions Manual

..........................................................................................................................................................................................................

Displaying and changing parameters for calculating the K coefficient

In the following example of programming, the superior calorific value is to be changed from 9.23 to
10.41 in order to calculate the K coefficient in compliance with GERG-88S, and the standard densi-
ty and CO content are to be displayed. The user code has already been entered beforehand.
2
..........................................................................................................................................................................................................
1. You are on the customized display screen (if not,
press Esc more than once).
2. Press " " twice to jump to the "PTZ" book.
3. Press " " three times. The cursor (+) will now be in
front of "K".
4. Press Enter to jump to the submenu.
5. The cursor is now located in front of "Measured val-
ues"; press " " twice to place it in front of "Parame-
ters".
6. Press Enter to jump to the list of parameters one
level down. The cursor ( ) will be in front of "Hs"
which is the symbol for the superior calorific value.
You will now be able to read the standard density
(sd) which is displayed under the superior calorific
value.
OPERATION
43