RMG EC 900 Operating Instructions Manual page 52

OPERATION
..........................................................................................................................................................................................................
44
8. Now press " " six times to set the first position at "1"; then press " " once to move to the sec-
ond position.
9. Proceed in the same way with the remaining positions. Please note that the decimal point will
shift if you change the numerical value to 10.41. So you have to set the 3rd position at ".". Af-
ter you have changed the 4th position, press " " again to generate a new 5th position.
10. After you have changed all positions, press Enter to save the new value.
..........................................................................................................................................................................................................
7. Press Enter again. Now the window will open where
you can change the superior calorific value. You can
change the numerical value under the "New value"
text. The cursor will be on the first position.
Below that, there is the permissible range for the su-
perior calorific value; and one line under that, there
is the time of the last change.
11. Last but not least, the CO
read. To do this, first jump back by one level with
„Esc" and then press " " so many times until the val-
ue appears in the bottommost line.
content remains to be
2