RMG EC 900 Operating Instructions Manual page 44

OPERATION
..........................................................................................................................................................................................................
there are two lines which are named "pmin" and "pmax". The lines represent the final level in our
structure. They may be lines that serve only to display data or there are lines for entering data. With
the "Escape" button you scroll back one level in the structure. Being in the "chapters" level and
pressing the "Esc" button, you get to the first book, the "CUSTOMIZED DISPLAY".
The top level consists of the following 9 books:
CUSTOMIZED DISPLAY: Customer-specific display. The operator can choose the quantities to be
36
TOT:
PTZ:
OPER.:
TARIFF:
FLOW:
TYPE:
COMM:
OUTPUTS:
CU
The display shows the following, for example:
Lines 1 to 5 show the menu within the selected book with cursor "+". The last line shows the books;
the leftmost book is always the current one (in the display above, the current book is "TYPE").
If an event (e.g. an error) has occurred, this will be indicated by the text "Event occurred" above
line 1.
..........................................................................................................................................................................................................
displayed here.
Totalizers including setting fields, associated operating modes, and on-
the-fly calibration.
Measured values of pressure and temperature as well as the K coefficient
with its associated parameters.
Operating parameters, e.g. messages, time system and access codes.
Archives and logbooks.
Flow rates and parameters for the pulse inputs.
ID display (corrector and transmitters).
Interface parameters, such as the baud rate or parity.
Parameters for the inputs and outputs.
Main menu for the communication module