OPERATION
...........................................................................................................................................................................................................
Operation
Display
In normal operating mode, the main totalizer is displayed.
When you press the control button on the right side of the case, all values will be shown.
After the preset display wake-up time has elapsed, the main totalizer will appear again.
20
If the display of the TERZ 94 does not show anything, the device is in energy-saving mode. In this
mode, the display is switched off. However, incoming pulses are processed and the outputs are set.
As soon as you press the control button, the display values will appear again.
Display
switched off:
...........................................................................................................................................................................................................
0 0 0 0 5 8 3 1 m3
Main totalizer Vm
1 0. 0 0 0 m3/h
Flow rate
0 0 0 0 0 0 0 0 m3
Start / stop totalizer
0 0 0 0 0 0 0 0 m3
Resettable totalizer
5 0. 0 0 P/m3 Meter factor
Manual TERZ 94 · EN09a · 2017-11