Screen: 6.5.0.0 (Checksum) - RMG EC 900 Operating Instructions Manual

OPERATION
..........................................................................................................................................................................................................

Screen: 6.5.0.0 (checksum)

>CS calib
>CS user
>CS manuf
<TYPE COMM OUTPUTS>
92
Screen: 6.6.0.0 (customer data)
Kunden-Nummer
Kunden-Name
Messstellen-Nummer
Messstellenbezeichng
Stations-Nummer
Stations-Name
Anlagen-Nummer
Eigent.-Nr. Umwerter
Eigent.-Nr. Zähler
Land
User
ZIP
Section
Messpunkt-Bezeichn.
IdN
<TYPE COMM OUTPUTS >
Customer data comprise 9 texts without designations. You can enter up to 20 alphanumeric char-
acters per field as text in each case. The preset texts are shown in grey in the table above. They will
be replaced by the texts entered and will no longer be visible after the customer data have been
inputted.
Country (2 characters), operator (6-digit number), zip code (5-digit number), section (1-digit num-
ber) and measuring point (19-character alphanumeric field) make up a 33-digit identifier that can be
used for device identification. Also for this purpose, the identification number can be used, which
consists of section, manufacturer, year and serial number.
..........................................................................................................................................................................................................
CB55 Checksum of the parameters protected by the calibration code
E596 Checksum of the parameters protected by the user code
4796 Checksum of the parameters protected by code M
"TYPE" book
Customer number
Customer name
Measuring point number
Name of measuring point
Station number
Station name
Installation number
Owner's No. of corrector
Owner's No. of meter
Country
Operator
Postal code
Section
Measuring point
Identification number
"TYPE" book