Service Menu - Primus RF6 Programming Manual

8.5. SERVICE MENU

In the Service menu you have some extra utilities:
The Software Version Number.
An overview of the 8 last failure messages.
Statistics for 9 general error messages
Pulley ratio
An overview of the input states
Switching On the Inverter for a technical intervention
Reset Cycle Counter and Statistics Error Messages
HOW TO GET INTO THE SERVICE MENU
The SERVICE menu can only be accessed when the machine is in standby (the power is switched
on, but no program is started).
SELECT Process_ _ is displayed.
Turn the key switch to the program mode.
The Main menu is now available.
Press the ARROW DOWN button to select the SERVICE menu.
Main Menu
Service
Press the ENTER button to make your selection.
Now you will see the first menu item.
By pressing the ARROW DOWN or UP button you can see the menu items one by one.
S:Software
Version 1.00
S:View Fault
Messages?
S:Fault N° 1 :
EXXX:YYYYYYYYYY
100962 G PUBLICATION DATE 24 JUN 2008.DOC
• The Software Version number.
• You can select the next menu item by pressing the ARROW
DOWN button.
• If you don't want to see the Fault messages,
press the ARROW DOWN button.
• If you want to see the Fault messages, press the
ENTER button.
• There are 8 Fault Messages kept in EEPROM memory.
• Fault N° 1 : the last occurred error message.
Fault N° 2 : the last –1 occurred error message.
...
Fault N° 8 : the last – 7 occurred error message.
• E XXX : The Error message number
• YYYYYYYYYY : The Error message name
PROGRAMMING MANUAL 97