Service Information; Maintenance; Information For Service - Primus RF6 Programming Manual

9. SERVICE INFORMATION

ATTENTION !!!
!
PROFESSIONAL REPAIRS IN ELECTRO INSTALLATION CAN BE CARRIED OUT ONLY BY
SERVICE ORGANIZATION WITH PERMISSION GIVEN BY PRODUCER / SUPPLIER.
IN CASE OF ANY MAINTENANCE OR REPAIR DISCONNECT THE MACHINE FROM SOURCE OF
ENERGY AND WAIT UNTIL THE MACHINE COOLS DOWN OR DRAINS WATER.
PLEASE FOLLOW ALL INSTRUCTIONS IN THE MANUALS AND THE LABELS AND AS WELL AS
VALID BASIC SECURITY LAWS IN ORDER TO PREVENT BURNS AND SCALDS AND
INJURIES CAUSED BY ELECTRICITY.

9.1. MAINTENANCE

Remove dirt from the keyboard by a damp cloth after disconnection from the power supply.
ATTENTION !!!
!
DO NOT USE AGGRESSIVE SOAPS, CAUSTIC CHEMICALS, GASOLINE OR OTHER
PETROCHEMICAL SUBSTANCES WHICH CAN DAMAGE THE KEYBOARD.

9.2. INFORMATION FOR SERVICE

ATTENTION !!!
!
EVERY ELECTRONIC BOARD HAS A STICKER PLACED ON THE EPROM, WHICH SPECIFIES THE
VERSION AND THE DATE OF THE SOFTWARE. THIS DATA ALONG WITH THE MACHINE SERIAL
NO., ORDER CODE MUST BE GIVEN IN ALL CORRESPONDENCE OR INQUIRIES TO THE
MANUFACTURER.
SOFTWARE VERSION AND DATE
MARKING FRAME : XXX-V.VV
V.VV stands for software Version
Current wash computer 1 piece execution : Full Control Software
MCB FC : XXX = 535
Old wash computer 2 piece execution : MCB 40 Software
(Micro controller board + PWR (power board)
MCB 40 : XXX =
126
(West European language Texts)
546 (East European language Texts)
183 (West European language Texts)
194 (East European language Texts)
PROGRAMMING MANUAL 100962 G PUBLICATION DATE 24 JUN 2008.DOC