Primus RF6 Programming Manual page 49

P:Pr XX Step XX
Signal : No
100962 G PUBLICATION DATE 24 JUN 2008.DOC
• Insert the desired Prewash time. Press the ENTER button for
confirmation.
• When a signal is programmed, a pause will be introduced at
the end of the Wash Step. This allows the operator to add
soap for the next step. To alert the operator that the program
has been interrupted, a buzzer signal will be activated.
By pressing the START button, the program will continue.
• Yes : Signal enabled.
No : Signal disabled.
• Press the ENTER button for confirmation.
Goto
PROGRAMMING MANUAL 47