Primus RF6 Programming Manual page 68

P:Pr XX Step XX
Signal : No
THE NO WASH SEQUENCE
Prewash | Wash | Cooldown | Rinse |
• The wash function of the programmed step is skipped.
Goto
66
minutes in steps of 0.5 minutes.
• The default time is 1,0 Minutes.
• Programming a time of 0 minutes : the Spray will not be
functional (cfr No Wash)
• Enter the desired spray time. Press the ENTER button for
confirmation.
• When a signal is programmed, a pause will be introduced at
the end of the Wash Step. This allows the operator to add
soap for the next step. To alert the operator that the program
has been interrupted, a buzzer signal will be activated.
By pressing the START button, the program will continue.
• Yes : Signal enabled.
No : Signal disabled.
• Press the ENTER button for confirmation.
Goto
Final Rinse | Soak |
PROGRAMMING MANUAL
No wash
Flush | Spray |
100962 G PUBLICATION DATE 24 JUN 2008.DOC