Primus RF6 Programming Manual page 104

TEST SEQUENCE
Display test and door lock test
Sensor test
Motor test
Water fill, heating and drain test
BASIC Diagnostic Wash program
Diagnostic Test Sequence for Machines with Top Soap Hopper.
Test (R) : For Rigid Mounted washing machines.
Test (F) : For Free Standing washing machines.
Test Test
(R) (F)
1 1
*** ***
3 3
4 4
5 5
6 6
7 7
8
8 9
20 20
21 21
22 22
23 23
24 24
25 25
26 26
27 27
28 28
29 29
32 30
31 31
50 50
Note : * The second drain valve will be opened if a second drain valve has been selected in the
Configuration menu.
*** No number 2 is displayed at the sensor test as this takes only a fraction of a second.
102
Info
Black display followed
by a Text display.
None
Reverse
Stop
Forward
Distribution
Low spin
High spin
Stop
I1
Drain 1
I2
Drain 1 (2)*
I3
Drain 1
I4
Drain 1
I5
Drain 1
I6
Drain 1
Tumble
Unload
PROGRAMMING MANUAL
Explanation
Door lock test (locks and unlocks 5 x the door)
Display test
Sensor test (all wash machine sensors are
tested)
Wash speed (inverse direction high spin)
⇒ Standstill motor
Wash speed (same direction high spin)
Distribution speed (same direction high spin)
Low spin speed (same direction high spin)
High spin speed
(the drum is turning away from the soap box)
Free run or controlled deceleration
The machine takes water by inlet 1
The water is drained by drain valve 1
The machine takes water by inlet 2 until the
safety level for heating is reached
Heating activated (only if Wait temp = on)
The water is drained by drain valve 1
The machine takes water by inlet 3
The water is drained by drain valve 1
The machine takes water by inlet 4
The water is drained by drain valve 1
The machine takes water by inlet 5
The water is drained by drain valve 1
The machine takes water by inlet 6
The water is drained by drain valve 1
⇒ The tumble sequence
⇒ End of the Diagnostic Cycle
100962 G PUBLICATION DATE 24 JUN 2008.DOC