The Creation Of A Wash Program - Primus RF6 Programming Manual

3.3. THE CREATION OF A WASH PROGRAM

a Wash Program is built up step by step.
each step always consists of a Wash sequence and a Drain/Extraction sequence.
Top soap hopper and Front soap hopper washing machines :
The Full Control Wash Computer is designated for 2 Main groups of washing machines:
-
- The washing machines with Top Soap Hopper
- The washing machines with Front Soap Hopper
Depending upon the machine type, more or less machine functions are available.
Programming the Wash sequence :
First choose the type of Wash sequence.
Washing machine with
Top Soap Hopper
PREWASH
WASH
COOLDOWN
RINSE
FINAL RINSE
FLUSH
SOAK
SPRAY
No WASH
Then program all the related functions of the sequence.
The available functions are :
Temperature
Water Level
Water Inlet Valves
The Wash Speed
The Reversing Interval times
Supplies
Sequence Time ( length of step )
Drain valve 1 – 2
Pause Signal
You will notice that each step has default settings.
This feature is very helpful as most of the newly created programs will not require changes to be
made to the suggested values.
100962 G PUBLICATION DATE 24 JUN 2008.DOC
Washing machine with
Front (or side) Soap Hopper
WASH
COOLDOWN
RINSE
SOAK
SPRAY
No WASH
Spray 1
Spray 2
PROGRAMMING MANUAL 9