Primus RF6 Programming Manual page 63

P:Pr XX Step XX
Off Time: _ _ Min
P:Pr XX Step XX
Time : 1.0 H
P:Pr XX Step XX
Signal : No
100962 G PUBLICATION DATE 24 JUN 2008.DOC
• Standard wash motor ON time of 12 seconds and a wash
motor OFF time of 10 minutes is recommended.
• Insert the desired ON – OFF times. Press the ENTER button
for confirmation.
• The Soak Sequence can be programmed between 0 and
25,5 Hours in steps of 0,1 Hour.
• The default time is 1.0 Hour.
• Programming a time of 0 hour : the Soak will not be
functional (cfr No Wash)
• Insert the desired Soak time. Press the ENTER button for
confirmation.
• When a signal is programmed, a pause will be introduced at
the end of the Wash Step. This allows the operator to add
soap for the next step. To alert the operator that the program
has been interrupted, a buzzer signal will be activated.
By pressing the START button, the program will continue.
• Yes : Signal enabled.
No : Signal disabled.
• Press the ENTER button for confirmation.
Goto
PROGRAMMING MANUAL 61