Primus RF6 Programming Manual page 82

- the actual wash machine states at the running wash cycle
By turning the key switch to Program, the Service-State menu will not disappear after 1 minute.
By pressing the ARROW DOWN button you will see all the menu items.
You can leave the Service - State menu by pressing the SERVICE-STATE button again.
6.24.3. INLETS 1, 2, 3 (4, 5, 6 )
Press INLET button 1, 2, 3 (4 , 5, 6) if you want to open a water Inlet valve at a running process.
Only functional at a running wash sequence.
The corresponding inlet valve will be opened while you are pressing the button.
ATTENTION !!!
!
ALL THE SAFETY FUNCTIONS WILL STILL BE FUNCTIONAL, SO IT CAN OCCUR THAT YOU CAN'T
ACTIVATE THE INLETS.
6.24.4. DRAIN
Press the DRAIN button if you want to open the drain valve at a running process.
Only functional at a running wash sequence.
The drain valve will be opened for the time you are pressing the button.
6.24.5. HEATING
Press the HEATING button if you want to switch On the heating at a running process.
Only functional at a running wash sequence.
The Heating will be switched on for the time you are pressing the button.
ATTENTION !!!
!
ALL THE SAFETY FUNCTIONS WILL STILL BE FUNCTIONAL, SO IT CAN OCCUR THAT YOU CAN'T
ACTIVATE THE HEATING.
6.24.6. SPEED ADJUST
Press the SPEED ADJUST button if you want to change the drum speed at a running process.
You can adjust the drum speed by inserting a new value.
The speed limits will be respected depending the washing machine type.
ATTENTION !!!
!
ALL THE SAFETY FUNCTIONS WILL STILL BE FUNCTIONAL, SO IT CAN OCCUR THAT YOU CAN'T
CHANGE THE SPIN SPEED.
80 PROGRAMMING MANUAL 100962 G PUBLICATION DATE 24 JUN 2008.DOC