Primus RF6 Programming Manual page 125

FAILURE 82: No Refill
MB machine only. Failure 82 occurs when the water filling is not restarted (at the wash sequence) when the
water level of the bath is below it's normal programmed value. When the water level drops below the
predefined water level limit of a hygienic wash cycle, the wash cycle can not be validated for hygienic
reasons as the wash process has not followed the standards of the wash program in execution. This mean
that the linen can not be unloaded at the hygienic side of the MB-machine and must be washed again after
repairing the problem with the water fill system.
DIAGNOSE:
Check Diagnostics Failure 11 : Fill Failure
FAILURE 83: CYCLE FAIL
MB machine only. Failure 83 occurs when the wash cycle can not be validated for hygienic reasons as the
wash process has not followed the standards of the wash program in execution.This mean that the linen can
not be unloaded at the hygienic side of the MB-machine and must be washed again after repairing the
problem. The Error message is only for information purposes and at the end of the wash cycle the operator
will get a warning the wash cycle must be repeated.
DIAGNOSE:
See Extra Error message that shows the cause of the failure.
FAILURE 84: NO STORE PC
MB machine only. Failure 84 occurs when the function to store all wash process data for a hygienic wash
cycle on a PC has failed. Some governments require traceability of wash cycle data in case of hygienic wash
cycles. This data can be send to a PC and stored for a long period.
If this wash process data is not transferred to the PC at the end of the hygienic wash cycle, the operator will
see the Error message so that he can solve the communication problem before starting a new wash cycle.
DIAGNOSE:
For more information about set-up and diagnostics see Manual Traceability Software for PC.
FAILURE 85: RTC LOW BATTERY
MB machine only. Failure 85 occurs when there is no battery available at the real time clock, or if the power
of the battery is too small to make the real time clock run correctly. On MB machines which are prepared for
tracebility of hygienic wash cycles, the machines must be executed with a real time clock for date and time
registration.
DIAGNOSE:
1. Check if there is a battery.
2. Check if the battery is still ok.
FAILURE 86: NO RTC COMMUNICATION
MB machine only. Failure 86 occurs when the real time clock is not connected to the wash computer. As a
result there is no communication between the real time clock and the wash computer, so the wash computer
fails to register date and time. On MB machines which are prepared for traceability of hygienic wash cycles,
the machines must be executed with a real time clock for wash cycle date and time registration.
DIAGNOSE:
1. Check if the real time clock is available.
2. Check if the real time clock is functional.
3. Check the electronic board.
FAILURE 95: WATCH DOG
If the watch dog has been activated, message 95 is logged in the Error log register. If this occurs often, ask
the help of a technician.
100962 G PUBLICATION DATE 24 JUN 2008.DOC
If not, put a battery at the real time clock.
Replace the battery in case of low power.
Connect the real time clock at its place.
If the real time clock is broken replace it.
If the electronic board is out of order, replace
the electronic board.
PROGRAMMING MANUAL 123