Specific - Primus RF6 Programming Manual

3.2. SPECIFIC

The PROGRAM Menu is designated for :
the creation of a specific name for a wash program.
the creation and implementation of a new wash program step by step.
editing a wash program step by step.
inserting and deleting steps in the wash program.
copying a wash program.
deleting a wash program.
inspecting the wash program by the view function.
The CONFIGURATION Menu is designated for :
the selection of the machine type.
loading the default factory settings for the CONFIGURATION and INITIALISATION menu.
the selection of the Brightness of the display.
the selection of the power supply voltage of the washing machine.
loading the frequency inverter parameters.
erasing all the programmed wash programs (reset Wash program EEPROM memory).
loading the standard wash programs.
the selection of the number of wash machine water supply inlets.
the selection of a second drain valve. (water recycling system)
the selection if the supply has to function as hopper or liquid.
the selection if external liquid pumps have been connected to the washing machine.
the selection if the manifold LS-flush water inlet has to function.
the selection if the temperature must be displayed in degrees Celsius or degrees Fahrenheit.
the selection Full Heating.
the selection Low Water Pressure
the selection of Wetcleaning (very low programmable water levels).
the selection of the minimum level start supplies.
the selection of the number of compartments drum for big MB-machines.
The INITIALISATION Menu is designated for :
the selection of the displayed Language.
programming the Service due value.
the selection of the Buzzer time interval.
the selection of the Advance function.
the selection of the Wait for temperature function.
the selection of the Manual override function.
the selection of the Temperature balance function.
programming the Default Motor On and Off times for reversing wash action.
the selection of the Automatic Cool-down function.
the selection of the Show Economic function.
programming the Boiler temperature (hot water supply).
programming the Temperature Overshoot Protection value.
programming the Maximum Heating time value.
programming the Maximum fill time value.
programming the Maximum Level overfill value.
The SERVICE Menu is designated for :
the inspection of the error messages log register and the list with statistics.
activating the power of the frequency inverter.
the inspection of the functionality of the electric input signals.
resetting the Cycle counter.
The DIAGNOSTIC Menu
100962 G PUBLICATION DATE 24 JUN 2008.DOC
is designated for starting up a diagnostic program.
PROGRAMMING MANUAL 7