Programming; General; Step : Program Menu - Primus RF6 Programming Manual

5. PROGRAMMING

5.1 GENERAL

Specific functions have been implemented in the Full Control wash computer to allow a detailed
programming.
Functions for the complete program.
- Program Number :
- Name :
- View :
- Edit :
- New :
- Copy :
- Delete :
- Exit :
Functions for the program steps.
- Step Number :
- Add :
- Edit :
- Insert :
- View :
- Delete :
- Exit :
Follow the flowchart step by step.
5.2. STEP : PROGRAM MENU
HOW TO GET INTO THE PROGRAM MENU
The initialisation menu can only be accessed when the machine is in standby (the machine is
powered up but no program is started).
SELECT Process_ _ is displayed.
Turn the key switch to the program mode.
The Main menu is now available.
Press the ARROW DOWN button to select the Program Menu.
Main Menu
PROGRAM
Press the ENTER button to confirm your selection.
Goto
38
Selecting the wash Program
Insert or Modify the Name for the Program
Inspecting the Program settings without making changes
Adjusting a Program
Creating a New Program
Making a Copy of an existing Program
Erase the Program
Leave the Program Menu
Selecting the Program Step
Adding a Program Step at the end of the program
Adjusting the Program Step
Adding a Program Step between two other steps
Inspecting the Step settings without making changes
Deleting a Step
Leave the Program Step Menu
PROGRAMMING MANUAL 100962 G PUBLICATION DATE 24 JUN 2008.DOC