Step : Programming The Wash Part - Primus RF6 Programming Manual

5.5. STEP : PROGRAMMING THE WASH PART
This paragraph gives a detailed explanation about programming the Wash Sequences.
Each program step contains a wash part and a drain part.
First the wash part must be selected, item by item can be programmed.
Next the drain part must be selected, item by item can be programmed. See step
Without making changes you can watch item by item, by pressing the ARROW DOWN or UP
button.
If you want to make changes :
- Insert a new value.
- Enable or disable a Setting by pressing the YES or NO button.
- Select a list element by pressing the ARROW LEFT or RIGHT button.
You have always to confirm by pressing the ENTER button.
Each time you add or insert a new step, default values have been pre-programmed.
So with less effort, complete programs can be programmed.
See also chapter 3 for a general explanation concerning the creation of wash programs.
You can recognize a list element by the LEFT and RIGHT ARROW symbol at the right side
on the display.
The arrow down symbol on the display points to the last Menu Item : EXIT.
SELECTING THE WASH PART
P:Pr XX Step XX
Wash
For Washing Machines with a Soap Box at the Top :
Wash
Prewash |
For Washing Machines with a Soap Hopper at the Front :
Wash
| Cooldown | Rinse | Soak | Spray | No wash
• For a new step, as a default, the first displayed function is the Wash sequence.
• Now by pressing the ARROW LEFT or RIGHT button, you can select the wished sequence.
• Press the ENTER button to confirm.
• You can also use the ARROW DOWN button if you accept the pre-programmed default value.
44
• If you have selected Add Step, Edit Step or Insert Step, you
have to select the wished wash sequence now.
• Depending the machine type with top or front soap hopper,
you have more or less sequences available.
| Cooldown | Rinse | Final Rinse
PROGRAMMING MANUAL
| Soak | Flush | Spray | No wash
100962 G PUBLICATION DATE 24 JUN 2008.DOC
.