5.2.9.5
Time Synchronization
To use this service, the being used on the relevant server must be opened. The
default port is port 123.
WBM: "Time Synchronization" tab
On this page, you can set the method for time synchronization, if you intend to use
it.
The time is used for time stamping of the diagnostic events.
Parameter
Current system
Here, either the time since the last restart or the current time is displayed.
time
If no time is received, "Not synchronized" is also displayed.
Enable time client
Enables/disables the time function.
IE/AS−INTERFACE LINK PN IO
Release 08/2018
C79000−G8976−C216−03
as of hardware version 1, as of firmware version V2.0
5 Display / WBM Configuration
Function
73