Identification & Maintenance - Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO Manual

5.2.1.2 Identification & Maintenance
Here, you can see various details of the IE/AS-i LINK for information and for
maintenance purposes.
You can also assign a plant-specific function tag and location tag for the IE/AS-i
LINK.
Keypad/Display
SYSTEM > Configuration > I&M > Manufacturer ID
Identification & Maintenance
WBM: "I&M" tab (
Parameter
Function tag Function identifier
Location tag Location identifier
IE/AS−INTERFACE LINK PN IO
Release 08/2018
C79000−G8976−C216−03
as of hardware version 1, as of firmware version V2.0
5 Display / WBM Configuration
Order ID
Serial number
HW revision
SW revision
Revision counter
Profile ID
Profile type
Version
Supported array
Function tag > enter... >
Location tag > enter... >
)
Meaning
55