Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO Manual page 133

Flag
OFFLINE
AUTO_ADDR_ENABLE
Ground short
EPROM_OK
IE/AS−INTERFACE LINK PN IO
Release 08/2018
C79000−G8976−C216−03
This flag is set when the mode is to changed to OFFLINE or this mode
has already been adopted.
This flag indicates whether the automatic address programming is
enabled (BIT = 1) or disabled (BIT = 0) by the user.
The flag is set when there is a short to ground on the AS-i cable.
This flag is set when the EEPROM of the device is OK.
as of hardware version 1, as of firmware version V2.0
8 Using the Data Record Interface
Meaning
133