Release 08/2018; Automatic Addressing - Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO Manual

5.2.16.3

Automatic Addressing

If you select this option, a new slave added to the AS-i line with AS-i address "0" is assigned
the next free address.
Disable this option once you have connected all required slaves.
Keypad/Display
AS-i Line 1 > Address help > enable/disable
WBM: "Automatic Addressing" Tab
Parameter
Automatic Enables/disables addressing support
addressing
-
IE/AS−INTERFACE LINK PN IO

Release 08/2018

C79000−G8976−C216−03
as of hardware version 1, as of firmware version V2.0
5 Display / WBM Configuration
Function
97