Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO Manual page 44

4 Keypad and Display
"SYSTEM" menu
SYSTEM > Configuration > General >
SYSTEM > Configuration > I&M > Manufacturer ID
SYSTEM > Configuration > Timeouts > Display > enter time... >
SYSTEM > Configuration > Language > select... >
SYSTEM > Reset
SYSTEM > Errors > Error display
SYSTEM > C-PLUG
SYSTEM > Diagnostic Buffer (Display) > Delete Diagnostic Buffer? >
IE/AS−INTERFACE LINK PN IO
44
PNIO device name > Change... >
Hardware
Firmware
Boot software
Order number
Serial number
MAC address
Order ID
Serial number
HW revision
SW revision
Revision counter
Profile ID
Profile type
Version
Supported array
Function tag > enter... >
Location tag > enter... >
Backlighting > enter time... >
> Restart > Run a restart
> Clear/reset module > Clear/reset module >
> Reset to factory settings > Set the factory defaults >
> Info
> Internal Memory −> C-PLUG > move... >
> C-PLUG −> Internal Memory > move... >
as of hardware version 1, as of firmware version V2.0
(display of the C-PLUG status)
Release 08/2018
C79000−G8976−C216−03