Error Statistics - Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO Manual

5 Display / WBM Configuration
Note
If you click on the address of a slave in the "Slave" row of the table, you open the
"Diagnostics" page directly (Navigation: AS-i Line > Slaves > Diagnostics).
5.2.13.2

Error Statistics

Keypad/Display
AS-i Line 1 > Error List > Display...
Slaves on which an error has occurred are indicated by "x" in the error list.
You will find more information on the errors of the individual slaves in Section
5.2.15.1.
AS-i Line 1 > Statistics > Line statistics
The "Line statistics" list displays all the error types and the total number of errors
on the AS-i line.
WBM: "Error Statistics" Tab
This page displays the number of errors on the AS-i line.
Note
If you click on the address of a slave in the "Slave" row of the table, you open the
page AS-i Line > Slave > Diagnostics directly.
IE/AS−INTERFACE LINK PN IO
82
AS-i power failures
Short to ground
Slave failure
Missing frame
Bad frame
Peripheral error
Protocol error
Bad master frame
Reset counters > Reset all counters
as of hardware version 1, as of firmware version V2.0
(select slave and "OK")
Release 08/2018
C79000−G8976−C216−03