Read_Extended_Id−Code_1 - Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO Manual

8.2.2.16 Read_Extended_ID−Code_1
Meaning
With this call, the extended ID1 code of an AS-i slave can be read out directly over
the AS-i cable. The call is intended for diagnostic purposes and is not required in
the normal master mode.
Structure of the RecordDataRead service − Index 24
Byte
Bit 7
0
1
2
3
IE/AS−INTERFACE LINK PN IO
Release 08/2018
C79000−G8976−C216−03
Bit 6 Bit 5 Bit 4
Version_hi = 0x00
Version_lo = 0x00
0x0
Reserved 0x00
as of hardware version 1, as of firmware version V2.0
8 Using the Data Record Interface
Meaning
Bit 3 Bit 2
ID1 code
Bit 1 Bit 0
167