Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO Manual page 12

1 Technical Description, Installation Guidelines, Operation
Warning
!
S
"WARNING" − Explosion Hazard − Do not disconnect while circuit is live unless
area is known to be non-hazardous.
S
"WARNING" − Explosion Hazard − Substitution of components may impair
suitability for Class I, Division 2 or Zone 2.
S
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D;
Class I, Zone 2, Group IIC or non-hazardous locations.
Caution
!
When handling and installing the IE/AS-INTERFACE LINK PN IO, make sure that
you adhere to the ESD guidelines.
Note
The IE/AS-i LINK can be configured, installed and started up independent of the
PROFINET installation.
IE/AS−INTERFACE LINK PN IO
12
as of hardware version 1, as of firmware version V2.0
Release 08/2018
C79000−G8976−C216−03