Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO Manual page 45

"IND. ETHERNET" menu
IND. ETHERNET > Info > Ethernet Port 1 >
IND. ETHERNET > IP Parameters > DHCP >
IND. ETHERNET > MAC address > display MAC address
"PROFINET IO" menu
PROFINET > Info > Device name > Change PROFINET device name
PROFINET > Error
IE/AS−INTERFACE LINK PN IO
Release 08/2018
C79000−G8976−C216−03
Link
Mode
Input bytes
Output bytes
> Ethernet Port 2 ... (as for Port 1)
IP address Controller
Controller name (PROFINET device name of controller)
Connection (AR status online/offline)
Controller (Controller status RUN/STOP)
Update time [ms]
as of hardware version 1, as of firmware version V2.0
4 Keypad and Display
(physical connection up/down)
(10/100 Mbps, half duplex/full duplex)
(number of received bytes)
(number of sent bytes)
disabled
MAC address
Device Name
Client ID
Change Client ID
IP > Set IP address
Mask > Set subnet mask
GW > Set gateway
45