Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO Manual page 4

Prior to Startup
Before putting the product into operation, note the following:
Caution
Prior to startup you must observe the instructions in the relevant documentation.
For ordering data of the documentation please refer to the catalogs or contact your
local SIEMENS representative.
Copyright E Siemens AG 2006 − 2008 All rights reserved
The reproduction, transmission or use of this document or its contents is not
permitted without express written authority. Offenders will be liable for
damages. All rights, including rights created by patent grant or registration of
IE/AS−INTERFACE LINK PN IO
a utility model or design, are reserved.
4
Siemens AG
Industry Automation
Industrial Communication
Postfach 4848, D-90327 Nürnberg
Siemens Aktiengesellschaft
Disclaimer
We have checked the contents of this manual for agreement with the hard-
ware and software described. Since deviations cannot be precluded entirely,
we cannot guarantee full agreement. However, the data in this manual are
as of hardware version 1, as of firmware version V2.0
reviewed regularly and any necessary corrections included in subsequent
editions. Suggestions for improvement are welcomed.
Technical data subject to change.
G79000−G8900−C216−03
Release 03/2008
C79000−G8976−C216−03