Plate Mounting And Removing, And Diagonal Image Ajustment Process; When Mounting A Plate - Ryobi 3302H Operation Manual

Plate Mounting and Removing, and
Diagonal Image Adjustment Process
Error messages when mounting and removing a plate, and doing the diagonal image adjustment .. Maintenance Edition
-45
Paper master mounting and removing process without clamping the tail edge .. Operation Edition - 65 and 66
1. When Mounting a Plate
I
[Operation]
[Press process] [ Error ]
(The drive lamp lights.)
messa~e
[Sound]
[
Plate
J
1. Push the plate load button.
(~)
+
occurrmg
position
(~)
+
E-*6
Starting
buzzer
sounds.
•
Warning
buzzer
sounds.
i - ,.2.
Push the plate load button. The press starts to crawl.]
1
The press stops at the E-*7
plate mounting_p~s_!t~o~. _________ _
-- =t
3. Open the safety cover and---------------------- -
insert the plate.
!
4. Push the plate load button.
(~)
1
5. Close the safety cover.
The leading edge clamp
closes.
The plate holding roller
contacts the plate cylin-
der.
E-*1
mounted
indication
lamp
Buzzer for
the plate
mounting
preparation
completed
sounds.
Goes off
Operation Edition - 59