Dampening Solution Cooling/Circulation Device - Ryobi 3302H Operation Manual

-
2-10
Dampening Solution Cooling/Circulation Device
<Front side> <Rear side>
A. Balance lamp--.., B. Alcohol density control dial
D. Pump---..,
Control panel
Fuse -------~
C. Power switch
Alcohol container
Air intake
---.J
(Do not obstruct)
Filter-------~
Condensing unit
---...J
(Fridge)
Eraser
/~
Return hose
intermediate tank]
Sensor cap
Overflow column
---+--
Air circulation vents
(Do not obstruct)
Standard column
[Alcohol density control device]
F. Auxiliary tank
~--
Water level
control cup
Chapter 2 Names and Functions
This device uses isopropyl alcohol.
A
WARNING
EXTREMELY FLAMMABLE
VAPORS CAN EXPLODE
HARMFUL OR FATAL IF SWALLOWED
If swallowed, do not induce vomiting, call a
physician immediately.
Keep out of reach of children.
Avoid prolonged breathing of vapors.
Do not siphon by mouth.
Do not store in vehicle or living space.
Store and use in a well-ventilated area.
Vapors can be ignited by a spark or flame source
many feet away.
Keep away from flame, pilot lights, stoves, heaters,
electric motors, and other sources of ignition.
Keep container closed.
A. Balance lamp
When the alcohol density is stable at the value set
using the alcohol density control dial, the lamp will
light.
When the alcohol density decreases, the lamp will
go off, and the alcohol will be supplied.
B. Alcohol density control dial
This is used to control the alcohol density.
C. Power switch
When the power switch is at the
[I]
position, the
pump and cooling system will operate.
D. Pump
This is the pump that circulates the dampening
solution from the device to the press and back.
E. Alcohol density control device
This is the alcohol density automatic control device
used to change the surface tension of the dampening
solution by changing the alcohol density.
F. Auxiliary tank
The dampening solution supplement is held in this.
G. Hydrometer column
When checking the alcohol density, put the alcohol
hydrometer in this.
Introduction Edition - 43