Ryobi 3302H Operation Manual page 49

Chapter 2 Names and Functions
[Printing mode matching each plate material]
2 different printing modes are available (one for metal plates and the other for polyester plates and paper masters). For
the proper printing start condition for either a metal plate or a polyester plate and paper master select the mode for the
plate or master to be used.
Operation and process in the metal plate printing mode
(Operation) (Process)
Press stops.
~Drive button ON
Press starts.
611
Printing start button ON
Water form roller ON
Ink form rollers ON
Printing
..J :
Manual operation
.(J. :
Automatic operation
[
The press rotates for the
J
value set in the wet
cycle (CY-1).
[
The press rotates for the
J
value set in the inking
cycle (CY-2).
Operation and process in the polyester plate or paper master printing mode
(Operation)
~Drive button ON
~
Set speed drive button ON
611
Printing start button ON
(Process)
Press stops.
.J
Press starts.
Press increases the speed to
the set speed.
Water form roller ON
Ink fortirrollers ON
Printing
Cycle setting (CY-1, CY-2, and CY-4).,. Operation Edition- 40
..J :
Manual operation
.(J. :
Automatic operation
[
The press rotates for the
J
value set in the wet
cycle (CY-4).
[
The press rotates for the
J
value set in the inking
cycle (CY-2).
Introduction Edition - 11